Issue: Kitchen screen is powered off or the Brink software will not load

Solution: Reboot the Kitchen display screen

1. Locate the kitchen display that you would like to reboot
2. Locate the power button (on the bottom right or left of the screen
   
3. Hold down the power button for 10 seconds and wait for the Kitchen display to FULLY turn off
4. Wait 1 minute then press the power button to turn the kitchen display back on.
5. Give the display 2 minutes to turn on and connect to the network to load the Brink software.
6. Kitchen Display should be on and working. If not, please reach out to the tech team by opening a ticket.